Solaris10 IP 설정하기

1. 서버에 설정된 네트워크카드와 ip 확인

[amerry:/]ifconfig -a                                    

lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1

        inet 127.0.0.1 netmask ff000000 

bge0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 2

        inet 2xx.1xx.1xx.1xx netmask ffffffc0 broadcast 222.106.136.255

        ether 0:14:4f:b1:c5:56 

bge1: flags=1100803<UP,BROADCAST,MULTICAST,ROUTER,IPv4> mtu 1500 index 3

        inet 192.168.2.2 netmask ffffff00 broadcast 192.168.2.255

        ether 0:14:4f:b1:c5:57 

bge2: flags=1100803<UP,BROADCAST,MULTICAST,ROUTER,IPv4> mtu 1500 index 4

        inet 192.168.2.3 netmask ffffff00 broadcast 192.168.2.255

        ether 0:14:4f:b1:c5:58 

2. 새로 ip 를 부여할 네트워크 카드 추가

[amerry:/]ifconfig bge3 plumb

[amerry:/]ifconfig -a

lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1

        inet 127.0.0.1 netmask ff000000 

bge0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 2

        inet 2xx.1xx.1xx.1xx netmask ffffffc0 broadcast 222.106.136.255

        ether 0:14:4f:b1:c5:56 

bge1: flags=1100803<UP,BROADCAST,MULTICAST,ROUTER,IPv4> mtu 1500 index 3

        inet 192.168.2.2 netmask ffffff00 broadcast 192.168.2.255

        ether 0:14:4f:b1:c5:57 

bge2: flags=1100803<UP,BROADCAST,MULTICAST,ROUTER,IPv4> mtu 1500 index 4

        inet 192.168.2.3 netmask ffffff00 broadcast 192.168.2.255

        ether 0:14:4f:b1:c5:58 

bge3: flags=1100802<BROADCAST,MULTICAST,ROUTER,IPv4> mtu 1500 index 6

        inet 0.0.0.0 netmask 0 

        ether 0:14:4f:b1:c5:59 

3. 서버 Reboot 후에도 적용될 수 있게 2개의 파일 수정

[amerry:/]cat /etc/hostname.bge3

192.168.2.4

[amerry:/]cat /etc/netmasks

#

# The netmasks file associates Internet Protocol (IP) address

# masks with IP network numbers.

# 

#       network-number  netmask

#

# The term network-number refers to a number obtained from the Internet Network

# Information Center.

#

# Both the network-number and the netmasks are specified in

# "decimal dot" notation, e.g:

#

#               128.32.0.0 255.255.255.0

#

2xx.1xx.1xx.1xx 255.255.255.192

192.168.2.0     255.255.255.0